Setup Guide

Public setup notes for this third-party Rokid Glasses debug cable

This page covers the current product: the Magnetic ADB Debug Cable. It is a third-party accessory for Rokid Glasses when you need a wired ADB connection.

Command flow

Local wired verification

adb start-server
adb devices
adb shell getprop ro.product.model
adb shell

Wireless handoff

Switch to Wi-Fi after the first wired session

adb tcpip 5555
adb shell ip addr show wlan0
adb connect <device-ip>:5555
adb devices

Replace <device-ip> with the address shown on the device network interface. Keep the device and workstation on the same network while testing.

Troubleshooting

If adb devices is empty

• Re-seat the magnetic connector and confirm the USB port is providing a stable connection.
• Restart the ADB server with adb kill-server && adb start-server.
• Try a different port or hub if the host is underpowering the connection.
• Confirm any device-side debug authorization prompt has been accepted.

Cable details

What the current product is built to do for Rokid Glasses

• USB-A host to 5-pad magnetic device connector.
• USB 2.0 data plus 5V power for setup and diagnostics.
• 1 m cable for setup, shell access, and repeat bench sessions.

The current product is a third-party accessory aimed at data access and debugging workflows first. If you only need charging, use a general-purpose cable instead.